Screws and More LLC. W/DBE. Suppliers of Specialty Construction Products to the Building Industry

   
 
 
 
 

http://www.abtdrains.com

ABT manufactures precast polymer concrete trench drain systems and forming systems for construction of cast-in-place
concrete trench drains, catch basins, and utility chases.

PolyDrain Precast Trench Drain System
The ABT PolyDrain modular, precast polymer concrete trench drain system provides chemical resistance, increases hydraulic performance, facilitates construction accuracy, requires less installation labor and skill, and has lower installed cost compared to conventional cast-in-place trench drain construction methods.

Trench Former Cast-In-Place Trench Drain System
Trench Former is a pre-engineered, cast-in-place concrete forming system for forming trench drains,
catch basins, oil/water separators, utility trenches, and voids in concrete placements. Consisting of
disposable form profiles, steel inlay rails, and drain grates, the ABT Trench Former cast-in-place trench
drain system eliminates hand-forming, heavy materials, keyways, and waterstops normally required for
cast-in-place trench drain construction.

Interceptor Trench Drain System for Roadway Construction
Interceptor is a PolyDrain trench drain system specifically developed for roadway applications.
The ABT Interceptor trench drain system provides the design flexibility to place the exact amount
of continuous inlet line drain area where it is required for efficient and safe highway surface drainage.

PolySelf Trench Drain System for Residential Surface Drainage
Developed for residential applications, PolySelf is a modular, precast trench drain system consisting
of polymer concrete drain channels, precast drain channel outlets, and lockable drain grates.
PolySelf can be installed across or along driveways as a driveway drainage system. The ABT PolySelf
precast trench drain system is also suited for use around pools and landscape areas, or anywhere
a residential surface drainage problem exists.

PolyDuct Utility Trench
The PolyDuct polymer concrete modular utility trench system can be used as a cable chase or to
provide chemical resistant secondary containment for fluid transmission lines. The ABT PolyDuct
base channel accepts stackable sidewall extensions to increase the depth of the utility trench.
Several utility trench grating and solid cover options are available to meet any traffic requirements
from pedestrian to solid-tire forklifts.

PathWay Cast-In-Place Cable Chase System
PathWay is a modular forming system for construction of cast-in-place cable chases in concrete floor slabs. PathWay provides
flexible layout during cable chase construction and easy access to power and data cables following installation. The ABT PathWay
cable chase system can be used with manufactured wiring systems or conventional commerical wiring. The finished cable chase
is an easy-access utility trench, not a raceway, and is not subject to electrical code compliance.

FirstFlush Storm Water Filtration System
The ABT FirstFlush storm water filtration system was developed for Clean Water Act (CWA) compliance and provides a
Best Management Practices (BMP) solution for storm water filtration. The FirstFlush storm water filtration system filters
storm water runoff from sites where oil, grease, and other hydrocarbons must be captured without impeding surface drainage
during heavy rainfall.


  Home | About Us | Products | Manufacturers | Support | Sitemap | Company